Nl:Met genealogie starten

From Gramps
(Redirected from Start with Genealogy/nl)
Jump to: navigation, search

Hoe start ik met genealogie met Gramps?

Voorbereiding

Indien u nog nooit aan genealogie gedaan hebt, is het best om met uzelf te starten en dan andere verwanten toe te voegen. Het allerbelangrijkste is dat u noteert hoe u bepaalde informatie verkreeg. Dit is nodig om

  1. later te weten hoe u de gegevens/veronderstellingen verzamelde
  2. vertrouwen bij andere onderzoekers te verkrijgen

Als u dus bij uzelf begint, dan interviewt u zich eigenlijk. Dit noemen we een primaire bron. Van deze primaire bron verkrijgen we informatie over geboortedag, doopdag, diploma's, ... . Deze gegevensbron laat ons toe af te leiden dat deze persoon bestaat en deel uitmaakt van een familie. Zo hebben we de belangrijkste elementen genoemd nodig in de genealogie: bronnen, gebeurtenissen, personen en families. Gramps laat ook toe om naast deze elementen ook zaken zoals opmerkingen, locaties, bibliotheken en media-objecten op te slaan.

Nu kunnen we verder gaan met informatie in Gramps in te voeren.

Een familiestamboom aanmaken

Als eerste stap klikt op de gereedschapsbalk op het icoon van de familiestambomen. Er wordt een venster getoond om verschillende familiestambomen te beheren. Maak een nieuwe familiestamboom aan en klik op Laad familiestamboom. Het Grampsscherm bevat een gereedschapsbalk, een menu en een linkse zijbalk om tussen de verschillende hoofdelementen te kunnen navigeren. Door in het menu het item Scherm aan te klikken kunt u bij de meeste schermen een rechtse zijbalk en een balk onderaan laten verschijnen. Maar dat is voor later.

Een bron aanmaken

Omdat u met uzelf start en de bron is het interview met uzelf, klikt u op de linkerzijbalk op het icoon van de bronnen. In de gereedschapsbalk klikt u op + (of CTRL+INSERT op uw toetsenbord) om het scherm 'Nieuwe bron - Gramps' te openen.

Stel dat u Jan Janssens heet. Nu maakt u dus een bron aan met het intervieuw met uzelf! U voert dus in:

  • Titel: Interview met Jan Janssens
  • Auteur: Jan Janssens

vervolgens klikt u op OK.

Zo, dat was uw eerste bron. U zult merken dat Gramps zelf een ID toevoegde aan de bron. U kunt het formaat van deze ID veranderen. Ga daarvoor in het menu naar Bewerken->Voorkeuren->ID Formaten.

Voor we verder gaan laten we eerst zien hoe u een scherm aanpast. In de gereedschapsbalk is het laatste icoon Scherm configureren.... Klikt u op dit icoon dan kunt u zo het actieve scherm aanpassen naar uw voorkeuren. U kunt bijvoorbeeld 'Laatste wijziging' activeren of de kolom 'Auteur' verplaatsen naar de tweede positie in de lijst. De meeste schermen hebben deze optie. Gebruik deze mogelijkheid om uw schermen aan te passen naar uw wensen!

Gegevens aan de bron toevoegen

We gaan nu wat bijkomende gegevens aan de bron toevoegen. Dubbelklik de bron (of dus Enter) om de bron 'Interview met Jan Janssens' te openen. Onderaan het bronscherm zie je een aantal tabs: Opmerkingen, Galerij, Gegevens, Bibliotheken en Verwijzingen. Je hebt ongetwijfeld ergens een foto van jezelf liggen -- laten we die toevoegen aan de Galerij van deze bron.

Voor we hieraan beginnen, moet je weten dat Gramps jouw bestand niet ergens opslaat: Gramps houdt enkel een verwijzing bij naar de plaats waar het bestand zich op jouw harde bevindt. Beslis dus eerst waar je afbeeldingen en documenten zal opslaan, en verander via het menu Bewerken->Voorkeuren->Algemeen de waarde van Standaardpad voor relatieve mediapaden naar de folder die je koos. Hou al je bestanden in deze folder goed georganiseerd: je kan bijvoorbeeld een folder maken voor bronnen, een folder voor foto's, ...

Eens je het standaardpad ingesteld hebt, klik in het bronscherm op de Gallerij-tab, en dan op het Toevoegen- icoon. Je krijgt een dialoogvenster waarmee je je zelfportret kan selecteren. Vul onderaan het dialoogvenster in het veld Titel "Afbeelding van Jan Janssens" in, zorg ervoor dat Omzetten naar relatief pad aangevinkt is, en klik OK. Je ziet nu het "Mediaverwijzing bewerken"-venster. In het bovenste deel van het venster kan je een stuk van de afbeelding aanduiden: als je bijvoorbeeld een groepsfoto hebt, is het zinnig om aan te duiden waar op de foto Jan Janssens staat. Je kan dat doen met de muis in de voorbeeldafbeelding (klik om de eerste hoek te selecteren, sleep naar andere hoek en laat los om een rechthoek aan te duiden), en eventueel je selectie verfijnen door de X- en Y-waarden te veranderen voor hoek 1 en hoek 2. Klik OK om het beeld te bewaren en terug te gaan naar de bron die je aan het bewerken was.

Als je de tekst van het interview uitgetypt hebt, zou je bijvoorbeeld een tekstdocument kunnen toevoegen aan de Galerij, maar je kan de tekst ook rechtstreeks als een Opmerking opslaan in Gramps. Het voordeel van tekst in een Opmerking op te slaan in plaats van in een document in de Galerij, is dat Gramps op de inhoud van opmerkingen kan zoeken. Klik op de Opmerkingen -tab, klik op het Toevoegen-icoon, en je krijgt een eenvoudige tekst-editor waar je tekst kan ingeven (of plakken).

Als je de tekst ingegeven hebt, kies in de lijst Type "Brontekst" (of "Verslag" als de tekst niet volledig of letterlijk weergegeven is), klik OK, en je bron 'Interview met Jan Janssens' heeft zowel een opmerking als een afbeelding in de galerij. Klik nogmaals OK om het bronvenster te sluiten.

Om de opmerking en de afbeelding te zien, zou je normaal gezien de bron opnieuw moeten openen. Gramps heeft een onderbalk, waar je informatie over het geselecteerde item in een lijst kan tonen. Om de onderbalk te zien, zorg ervoor dat het menu Scherm->Onderbalk aangevinkt staat. Je ziet een aantal tabs die informatie kunnen weergeven: de elementen die die informatie tonen, heten "Gramplets" in Gramps. Het zijn kleine plugins die allerlei taken kunnen uitvoeren. Je kan een gramplet toevegen aan de onderbalk met een rechtermuisklik rechts van de uiterst rechtse tab.

Tijd voor uw eerste persoon

So much done, and not yet one single person is present in your family tree! Time to change that. Let's add yourself. As all information you will add comes from the source 'Interview with John Doe', we first store this in an easy to reach place. In the toolbar click on the Clipboard icon to open the clipboard. Select in the source view the source 'Interview with John Doe', and drop it in the Clipboard.

In the navigator, click on the Person icon to see the person view. Note that in the toolbar there is pressed in button indicating the type of person view you have activated. Try the other possibility once to see what changes. Many Categories in the navigator have more than one view!

Click now on the Add button to add your first person. You now see the person editor, and the top part of this should be what you expect: all information about the name of this person. So, type in your given name, and your surname. If you are eg. Spanish and have a very long surname, then click on the 'Add' icon after the surname to enter multiple surnames. See the manual for more details.

As you enter data, you need to add where you obtained this data. For this, drag the source you stored in the clipboard, to the Sources tab of the Person Editor. This will open up the 'Source Reference Editor'. The bottom part of this editor is the same source as already entered, but the top part is new, and contains the data on how the information of the person was found in this source and how certain you are of it. For this interview you can set Confidence to Very High.

You already have a picture of yourself, as you added it to the source. You can now add this same picture to this Person record you are creating. For this, click on the Gallery tab of the person editor, and click on the Share button. This will open a list of all media objects. Select the one you made earlier and click OK to store everything. You could also have used the clipboard: or by adding the picture there from the media view, or by adding the media reference in the clipboard by dragging it from the gallery of an object to the clipboard, and then using it from there where you need it.

Save everything by clicking OK until you see the main Gramps view again.

Gebeurtenissen

Next, you will want to add your birthday. For this, open the person editor of yourself, and note that in the bottom the Events tab is open. Click on the Add icon to add an event. Gramps preselects birth event for the first event that you want to add. Enter the required information, and if you know the place where you where born, click on the Add icon after the Place entry to create this place. For places, try to add latitude and longitude as that allows to show information on a map later.

Note that the editor that has opened is the Event Reference Editor. This means that there is a global part that you can share with other people (the bottom of the editor), and a top part which is unique to the person. This top part is used to enter the Role of the person in the event. In your own birth, you have the primary role. If you know the name of people helping in the birth, and you want to store these people also, you can share this event with them, with a Role of Aide. You can type a custom role in the Role field if you are not happy with the predefined possibilities.

Again, add a source to the event via the Sources tab, like you did before. As you have no real recollection of your own birth, the interview should not have confidence 'Very High'! You would need to add a birth document as source for that.

When done, click OK to save the event, and then again to safe the person, and you have your first full person record.

Familie

You now have entered yourself, time to add your parents. You could add your father and mother as you added yourself, and then connect them in a family, but most people will do things in one go via the RelationshipsRelationship View or one of the ChartsPedigree View. Let's go to the Relationship view: select yourself in the person view, and then in the navigator, select the relationship view. This view has a toolbar that allows to add parents or to add a spouse. Click on the Add parents icon to open the family editor.

In the family editor you will see that you are present in the Children tab. Use the Add icon next to father and mother to add them as you have added yourself. Use the Add icon in the Children tab to add your siblings. You need to use drag and drop to sort siblings in the order as you want them to appear in reports (normally oldest to youngest I suppose).

In the family editor you can also add events. We call these family events as they are shared by the two parents. Typically this is Engagement, Marriage, .... In these the Role is 'Family'. It is not needed to add these events also individually to the two parents!

When done, click OK to safe the family, and you will return to the relationship view with all the extra information visible. From within this view you can navigate to other people and keep enlarging your family tree.

Een verslag

Now that you have a first small family tree, make a report. Go to the oldest grandparent you have in the relationship view or the person view (you can set bookmarks on people and set a home person!). With this person selected, go in the menu Reports->Text Reports->Detailed descendant report, to create a nice textual descendant report.

Wat nu?

Gramps has many features, as you improve, take the time to go over the manual and learn more. Use the mailing list to discuss issues.

Aanverwante artikels

Leervideos