Difference between revisions of "Nl:Gramps 3.0 Handleiding - Invoeren en Aanpassen Gegevens: Kort"

From Gramps
Jump to: navigation, search
(Een relatie bepalen)
(Een relatie bepalen)
Line 40: Line 40:
  
 
Om een nieuwe relatie van de actieve persoon in te geven gaat u naar het relatiescherm. U ziet dat de actieve persoon wordt weergegeven. Naast het label {{man label|Familie}} bevindt zich een knop {{man button|+}}. Wanneer u op deze knop {{man button|Add}} klikt wordt het venster {{man label|Nieuwe familie }} getoond met de actieve persoon als de vader of de moeder. Indien deze knop {{man button|+}} niet zichtbaar is, kan u de werkbalk gebruiken. Klik op het icoon {{man label|Voeg een nieuwe familie toe..}}.
 
Om een nieuwe relatie van de actieve persoon in te geven gaat u naar het relatiescherm. U ziet dat de actieve persoon wordt weergegeven. Naast het label {{man label|Familie}} bevindt zich een knop {{man button|+}}. Wanneer u op deze knop {{man button|Add}} klikt wordt het venster {{man label|Nieuwe familie }} getoond met de actieve persoon als de vader of de moeder. Indien deze knop {{man button|+}} niet zichtbaar is, kan u de werkbalk gebruiken. Klik op het icoon {{man label|Voeg een nieuwe familie toe..}}.
 
+
[[Image:Selecteermoeder.png|right|thumb|250px|Fig.5.3. Een persoon selecteren]]
  
  
Line 46: Line 46:
  
 
{{man note|1=Filteren|2=Standaard zal GRAMPS enkel die lijst van personen tonen die louter theoretisch een relatie kunnen hebben met de actieve persoon. Zodoende zal GRAMPS enkel die personen tonen waarvan de geboorte- en overlijdensdatums passen in de levensjaren van de actieve persoon. Indien u dit wenst, kan u een persoon toevoegen aan de lijst met de {{man button|+}} knop. Om de filter volledig uit te schakelen en toch alle personen te tonen, vinkt u het '''Alles tonen''' -vierkantje aan, dat onderaan links getoond wordt.}}
 
{{man note|1=Filteren|2=Standaard zal GRAMPS enkel die lijst van personen tonen die louter theoretisch een relatie kunnen hebben met de actieve persoon. Zodoende zal GRAMPS enkel die personen tonen waarvan de geboorte- en overlijdensdatums passen in de levensjaren van de actieve persoon. Indien u dit wenst, kan u een persoon toevoegen aan de lijst met de {{man button|+}} knop. Om de filter volledig uit te schakelen en toch alle personen te tonen, vinkt u het '''Alles tonen''' -vierkantje aan, dat onderaan links getoond wordt.}}
[[Image:Select-person.png|right|thumb|250px|Fig.5.3. Een persoon selecteren]]
+
 
 
Om een bestaande relatie via het relatiescherm aan te passen, klikt u op de knop {{man button|Familie beserken}} die zich naast het familiegedeelte bevindt. Zijn er meerdere relaties, dan kunt u de partner of echtgeno(o)t(e) selecteren door op de overeenkomstige {{man button|Partner bewerken}} knop die zich naast het relatiegedeelte bevindt.
 
Om een bestaande relatie via het relatiescherm aan te passen, klikt u op de knop {{man button|Familie beserken}} die zich naast het familiegedeelte bevindt. Zijn er meerdere relaties, dan kunt u de partner of echtgeno(o)t(e) selecteren door op de overeenkomstige {{man button|Partner bewerken}} knop die zich naast het relatiegedeelte bevindt.
  

Revision as of 11:37, 14 January 2008

Dit deel is bedoeld om u een basiskennis te geven zodat u kunt starten met uw genealogische informatie in GRAMPS in te geven. Hier wordt uitgelegd hoe personen in het gevensbestand in te voegen en hoe familirelaties te bepalen. (Meer uitleg volgt in het volgende deel: Gramps 3.0 Wiki Manual - Entering and Editing Data: Detailed/nl.)


Gnome-important.png Special copyright notice: All edits to this page need to be under two different copyright licenses:

These licenses allow the Gramps project to maximally use this wiki manual as free content in future Gramps versions. If you do not agree with this dual license, then do not edit this page. You may only link to other pages within the wiki which fall only under the GFDL license via external links (using the syntax: [https://www.gramps-project.org/...]), not via internal links.
Also, only use the known Typographical conventions



Introductie

Laat ons eerst even bekijken welke informatie u kunt ingeven in het GRAMPS-gegevensbestand:


  • Persoonlijke informatie over een persoon (namen, adressen, geboorte- en overlijdensdatum, enz.)
  • Informatie over individuele relatielas (huwelijken, echtscheidingen, wettelijke verbintenissen, enz.)
  • Informatie over de ouders en de kinderen van een persoon
  • Bronnen die uw onderzoek ondersteunen
Gramps-notes.png
Sneltoetsen

Bovenover de mogelijk om interactief in GRAMPS te werken via menu's en knoppen, kan u gebruik maken van een uitgebreide verzameling sneltoetsen. Meer informatie hierover vindt u onder: append-keybind .

Laat ons nu even overlopen hoe u bovenstaande informatie kunt ingeven en aanpassen.

Een persoon toevoegen of aanpassen

Fig. 5.1. Het personenscherm

Er zijn verschillende manieren om een persoon aan het gegevensbestand toe te voegen. We zullen sommige hieronder behandelen. De eenvoudigste manier om een persoon toe te voegen is in het personenscherm. Wanneer u zich bevindt in dit personenscherm, klikt u op de + Toevoegen van de werkbalk. Vul vervolgens alle gekende gegevens van deze persoon in, in de velden van het venster Nieuw persoon (zie edit-pers-fig voor details).

Wanneer de persoon zich al in het gegevensbestand bevindt, kunt u deze persoon selecteren in het personenscherm en op de knop Bewerken van de werkbalk klikken.

Gramps-notes.png
Andere manieren om eeen persoon toe te voegen of aan te passen in het personenscherm

U kunt ook de menu-items Toevoegen... en Bewerken... gebruiken die beschikbaar zijn onder het menu Bewerken. Of u klikt met de rechtermuisknop op de persoon en selecteert Toevoegen... of Bewerken... via het getoonde menu.

Personen kunnen ook toegevoegd worden via het relatiescherm en het venster: Familie aanpassen en op andere plaatsen waar dit zin maakt.

Een relatie bepalen

Fig.5.2. Een familie bewerken

Er zijn twee hoofdmethoden om relaties tussen personen op te geven. U kunt het relatiescherm gebruiken of het venster Familie aanpassen van het familiescherm. Het familiescherm wordt gewoonlijk gebruikt om alle relaties binnen eenzelfde familie op te bouwen. Het relatiescherm wordt gewoonlijk gebruikt om meerdere relaties van één persoon in te geven.

Om een nieuwe relatie van de actieve persoon in te geven gaat u naar het relatiescherm. U ziet dat de actieve persoon wordt weergegeven. Naast het label Familie bevindt zich een knop +. Wanneer u op deze knop Add klikt wordt het venster Nieuwe familie getoond met de actieve persoon als de vader of de moeder. Indien deze knop + niet zichtbaar is, kan u de werkbalk gebruiken. Klik op het icoon Voeg een nieuwe familie toe...

Fig.5.3. Een persoon selecteren


Stel u nu eerst de vraag of de persoon die een relatie heeft met de actieve persoon, al bestaat in het gegevensbestand. Is dit het geval, klik dan op de knop Selecteer een persoon als... . Vervolgens hebt u de mogelijkheid om een persoon te kiezen uit de lijst van personen die zich in het gegevensbestand bevinden via een venster Selecteer vader/moeder. Bevindt de persoon zich nog niet in het gegevensbestand, gebruik dan de knop +. Dit laat u toe om een nieuwe persoon aan het gegevensbestand toe te voegen en vervolgens de relatie in te voeren die deze persoon met de actieve persoon heeft.

Gramps-notes.png
Filteren

Standaard zal GRAMPS enkel die lijst van personen tonen die louter theoretisch een relatie kunnen hebben met de actieve persoon. Zodoende zal GRAMPS enkel die personen tonen waarvan de geboorte- en overlijdensdatums passen in de levensjaren van de actieve persoon. Indien u dit wenst, kan u een persoon toevoegen aan de lijst met de + knop. Om de filter volledig uit te schakelen en toch alle personen te tonen, vinkt u het Alles tonen -vierkantje aan, dat onderaan links getoond wordt.

Om een bestaande relatie via het relatiescherm aan te passen, klikt u op de knop Familie beserken die zich naast het familiegedeelte bevindt. Zijn er meerdere relaties, dan kunt u de partner of echtgeno(o)t(e) selecteren door op de overeenkomstige Partner bewerken knop die zich naast het relatiegedeelte bevindt.

Om een nieuwe relatie inhet familiescherm in te voeren, klikt u op de knop + van de werkbalk. Er verschijnt dan een leeg venster Nieuwe familie. Nu kunt u personen aan de familie toevoegen.

Ouders vastleggen

Fig.4.x Select family

You can specify Active Person's parents in the Relationship View( family-fig ). A little care is required to prevent the creation of duplicate families. If you wish to add the Active Person to an already existing family, you should click the Select button. If the family including the parents does not already exist, you should click the Add button.

If you click on the Select button, you are presented with the Select Family dialog. This will allow you to select the existing family, and then the Active Person will be added as a child to the family.


If you click on the Add button, a new Edit Family dialog is presented with the Active Person listed a child of the new family. You can add the parents to the family by either adding new people as the parents or selecting existing people as the parents.

Gnome-important.png
Warning

If you create a new family and select parents that are already in an existing family, GRAMPS will issue a warning message. If you proceed by saving the new family, you will have a duplicate family.

Fig.4.x. Duplicate family

You can also specify the parents of a person in the Family List View. If the family already exists, click on the Edit button on the tool bar and add the person as a child when the Edit Family dialog is displayed. If the family does not already exist, click the Add button to create a new family, and add the appropriate parents and children.

Kinderen opgeven

Fig.4.x. Child reference editor

Adding children to a relationship is done through a similar procedure. From the Relationships View or the Family List View, select the existing family or create a new family. Children can be added by selecting the Add button or Select button to the right of the child list.

Clicking the Add button will display the Edit Person dialog, allowing you to enter a new person. Clicking on the Select button, will allow you to select an existing person from a list. By default, the child is added with a the relationship type of birth to both parents.

If you wish to change the parent/child relationship from the default setting of birth, select the child and click on the Edit button. This will display the Edit Child Reference dialog.


Foto's en andere media-objecten toevoegen

You can add photos and other media objects to individual people, events, sources, and places. You can also add images that might not be limited to a single person or event (for example, group family photos).

If you want to add an image to a single person, switch to the People View ( side-nofilt-fig ), select a person, and then click the Edit icon on the toolbar. This will bring up the Edit Person dialog ( edit-pers-fig ). Next, select the Gallery tab, and click the + button to call up the Select a media object dialog. Type a filename or browse to find the image file you want and then provide a title for that image. Keep adding images until you are done.

To add images related to a relationship (for example, a marriage), switch to the Family View ( family-fig ) and double-click on the Spouse box. This calls up the Marriage/Relationship editor dialog. Select the Gallery tab and click the + button to add an image.

To add images related to a source or a place, first switch to the Source View ( sources-fig ) or Place View ( places-fig ). Select the source or place you want and then either double-click on it or click the Edit icon on the toolbar. Select the Gallery tab and click the + button to add an image.

Finally, to add images that you want to include in the database, but hare are not limited to any particular person, relationship, source or place, switch to the Media View ( media-fig ). Then click the Add icon on the toolbar to add an image. If you have already added any images to any individual galleries, you will also find them listed in the Media View.

Gramps-notes.png
Alternate way of adding images to galleries

An image can always be added to any gallery by using drag-and-drop. Items can be dragged from the Media View, any gallery, the desktop, the file manager or a web browser and dropped on the target gallery, adding the image to the gallery.

In any gallery, you can also use the Edit to edit image information and the - button and to remove the image reference from that gallery.

Gramps-notes.png
Removing an image from a gallery

Removing a media object from a gallery does not remove the image from the database. To completely remove the image from the database, delete it from Media View by first selecting it and then clicking the Remove icon on the toolbar.

Gebeurtenissen, bronnen, locaties en bibliotheken aanpassen

To add an event, a source, a place, or a repository to the database, switch to the appropriate Events View ( events-fig ), Sources View ( sources-fig ), Places View ( places-fig ), or Repositories View ( repository-fig ). Then click the Add icon on the toolbar to add the corresponding object. Enter the information into the Event Editor ( Source Editor , Place Editor , or Repository Editor ) dialog.

To edit information about events, sources, places, and repositories already present in the database, switch to the appropriate view, select an entry you would like to view/modify, and then click the Edit icon on the toolbar. Alternatively, you may double-click on the entry to edit it.


Vorige [[Nl:Gramps {{{3}}} Wiki Handleiding| Index]] Volgende