Gramps 4.0 Wiki Manual - Command Line
|Special copyright notice: All edits to this page need to be under two different copyright licenses:
These licenses allow the Gramps project to maximally use this wiki manual as free content in future Gramps versions. If you do not agree with this dual license, then do not edit this page. You may only link to other pages within the wiki which fall only under the GFDL license via external links (using the syntax: [https://www.gramps-project.org/...]), not via internal links.
This appendix provides the reference to the command line capabilities available when launching Gramps from the terminal.
- 1 Start Gramps through the Command Line
- 2 Python options
- 3 Available Gramps options
- 3.1 List options
- 3.2 Version options
- 3.3 Format options
- 3.4 Opening options
- 3.5 Import options
- 3.6 Export options
- 3.7 Action options
- 3.8 Force unlock option
- 3.9 Configuration (config) option
- 4 Operation
- 5 Examples
- 6 Environment variables
Start Gramps through the Command Line
Normally Gramps is started through the graphical user interface (GUI) on your platform.
It is also possible to start Gramps using a command line interface (CLI). CLI use can
- produce reports that are not available via the GUI,
- create reports, do conversions etc. without opening a window and
- can provide extra information in the event of problems.
This section of the user manual describes how to start Gramps through the CLI, and the features that are available.
The way you start Gramps through the CLI depends on the operating system you are using.
For simplicity of description, the examples of use below are written from the point of view of running Gramps on Linux. The examples would need to be changed for other platforms.
Only the Linux platform is officially supported as Gramps developers use and test the source code on that platform, fixing any problems that arise due to upgrades.
Assuming you have used the standard Package Manager (either through a CLI or a GUI) for your Linux distribution, you start Gramps through the CLI by typing
MS Windows is a community supported platform. If you install the Windows AIO GrampsAIO32 or GrampsAIO64 executable, then this will place an icon on the desktop as well as a menu iten in the 'Start' menu.
What is the best way of knowing what command to type?
Starting Gramps from the command line (cmd.exe) depends on where you have chosen to install Gramps.
- Right click on the ??terminal Gramps application, or the corresponding item in the Start menu.
- Note down the starting directory.
- Select the whole of the command and copy (ctrl-C) it.
- From the Start menu, start cmd.exe.
- Change directory to the starting directory you noted down.
- Right click and select Paste.
- Press ↵ Enter.
For example, this might be:
cd "\Program Files\GrampsAIO64\bin "C:\Program Files\GrampsAIO64\bin\pythonw.exe" -EO ..\share\gramps\gramps.py
When the instructions below tell you to type something after the start command, you just type this after the last line, for example:
cd "\Program Files\GrampsAIO64\bin "C:\Program Files\GrampsAIO64\bin\pythonw.exe" -EO ..\share\gramps\gramps.py -L
There are other ways to install Gramps for MS Windows, but these are much more complicated and are not covered here.
Mac OS X
Mac OS X is a community supported platform. If you download the Mac OS X disk image (.dmg), then you simply drag the application to your application folder (or anywhere else you want to store it) and start Gramps by double clicking on the application in the normal way.
To run from the command line, you'll need to start Terminal, found in Applications:Utilities. Once you have a terminal window open, at the prompt type
If you installed Gramps in Applications along with most of your other apps, that would be
You may use any of the command-line options along with this. For example, to get a detailed listing of all of the Family Tree databases in your default Family Tree folder, you would use
There are other ways to install Gramps for Mac OS X, but these are much more complicated and are not covered here.
In the examples of different platforms above, and also in commands in various files you may see some options after the 'python' command, for example '-EO' in
"C:\Program Files\GrampsAIO64\bin\pythonw.exe" -EO ..\share\gramps\gramps.py -L
It is important to distinguish between the python options in this case:
and the Gramps options, in this case
The python options that you may come across are:
- -E Ignore all PYTHON* environment variables, e.g. PYTHONPATH and PYTHONHOME, that might be set.
- -O Turn on basic optimizations. This changes the filename extension for compiled (bytecode) files from .pyc to .pyo. See also PYTHONOPTIMIZE.
The -O optimise flag has a number of effects in Gramps:
- If it is not turned on, an additional Debug entry appears in the Tools menu.
- If it is not turned on, info logging messages are output.
- If it is not turned on, debug statements may be activated.
- If it is not turned on, additional features are available in the Plugin Manager.
The Gramps options are described below.
Available Gramps options
This section provides the reference list of all command line options available in Gramps. If you want to know more than just a list of options, see next sections: Operation and Examples. The summary below is printed by gramps -h.
Usage: gramps.py [OPTION...]
--load-modules=MODULE1,MODULE2,... Dynamic modules to load
-?, --help Show this help message --usage Display brief usage message
-O, --open=FAMILY_TREE Open Family Tree -C, --create=FAMILY_TREE Create on open if new Family Tree -i, --import=FILENAME Import file -e, --export=FILENAME Export file -f, --format=FORMAT Specify Family Tree format -a, --action=ACTION Specify action -p, --options=OPTIONS_STRING Specify options -d, --debug=LOGGER_NAME Enable debug logs -l List Family Trees -L List Family Trees in Detail -t List Family Trees, tab delimited -u, --force-unlock Force unlock of Family Tree -s, --show Show config settings -c, --config=[config.setting[:value]] Set config setting(s) and start Gramps -y, --yes Don't ask to confirm dangerous actions (non-GUI mode only) -q, --quiet Suppress progress indication output (non-GUI mode only) -v, --version Show versions
The usage message is as follows:
Example of usage of Gramps command line interface 1. To import four databases (whose formats can be determined from their names) and then check the resulting database for errors, one may type: gramps -i file1.ged -i file2.gpkg -i ~/db3.gramps -i file4.wft -a tool -p name=check. 2. To explicitly specify the formats in the above example, append filenames with appropriate -f options: gramps -i file1.ged -f gedcom -i file2.gpkg -f gramps-pkg -i ~/db3.gramps -f gramps-xml -i file4.wft -f wft -a tool -p name=check. 3. To record the database resulting from all imports, supply -e flag (use -f if the filename does not allow Gramps to guess the format): gramps -i file1.ged -i file2.gpkg -e ~/new-package -f gramps-pkg 4. To save any error messages of the above example into files outfile and errfile, run: gramps -i file1.ged -i file2.dpkg -e ~/new-package -f gramps-pkg >outfile 2>errfile 5. To import three databases and start interactive Gramps session with the result: gramps -i file1.ged -i file2.gpkg -i ~/db3.gramps 6. To open a database and, based on that data, generate timeline report in PDF format putting the output into the my_timeline.pdf file: gramps -O 'Family Tree 1' -a report -p name=timeline,off=pdf,of=my_timeline.pdf 7. To generate a summary of a database: gramps -O 'Family Tree 1' -a report -p name=summary 8. Listing report options Use the name=timeline,show=all to find out about all available options for the timeline report. To find out details of a particular option, use show=option_name , e.g. name=timeline,show=off string. To learn about available report names, use name=show string. 9. To convert a family tree on the fly to a .gramps xml file: gramps -O 'Family Tree 1' -e output.gramps -f gramps-xml 10. To generate a web site into an other locale (in german): LANGUAGE=de_DE; LANG=de_DE.UTF-8 gramps -O 'Family Tree 1' -a report -p name=navwebpage,target=/../de 11. Finally, to start normal interactive session type: gramps Note: These examples are for bash shell. Syntax may be different for other shells and for Windows.
Print a list of known family trees:
-l, print a list of known family trees
-L, print a detailed list of known family trees
Note that dates are shown in the default LOCALE format. You change that at the system level. For example, on POSIX-based systems you could:
LC_TIME=en_AU.UTF-8 gramps -L
-v or --version prints version of Gramps and dependencies, information about environment settings and python and system paths
The format of any file destined for opening, importing, or exporting can be specified with the
option. The acceptable format values are listed below.
Full family tree support
These formats contain all your data that is present in a family tree.
- gramps - Gramps XML format: This format is available for import, and export. When not specified, it can be guessed if the filename ends with .gramps
- gpkg - Gramps package XML format: This format is available for import and export. When not specified, it can be guessed if the filename ends with .gpkg. This creates a zip package with your data as xml, and all your media files included
- grdb - pre Gramps 3.x database: This format is available for import to support the old file format of Gramps. Everything in the grdb file is imported. When not specified, it can be guessed if the filename ends with .grdb
- burn - GNOME iso burning: export, only available on GNOME where burn protocol exists
Reduced family tree support
These formats contain most, but not all data that can be created in Gramps
- ged - GEDCOM format: This format is available for import, and export. When not specified, it can be guessed if the filename ends with .ged
- gw - GeneWeb file: This format is available for import and export. When not specified, it can be guessed if the filename ends with .gw
Subset of your data
These formats contain a specific subset of your data
- csv - Comma Separated Value: This format is available for import and export. Be careful however, import must be as values created by the export function. Only a part of your data is contained in the output.
- vcf - VCard format: import and export
- vcs - VCalandar format: export
- def - old Pro-Gen format: import
- wft - Web Family Tree: This format is available for export only. When not specified, it can be guessed if the filename ends with .wft
You can open a family tree, or you can open a file by importing it in an empty family tree.
To let Gramps handle this automatically, just supply the familytree or filename you want to open:
python gramps.py 'My Fam Tree' python gramps.py JohnDoe.ged
The first opens a family tree, the second imports a gedcom into an empty family tree.
Additionally, you can pass Gramps the name of the family tree to be opened:
- use this option :
-O, Open of a family tree. This can be done also by just typing the name (name or database dir)
python gramps.py 'Family Tree 1' python gramps.py /home/cristina/.gramps/grampsdb/47320f3d python gramps.py -O 'Family Tree 1' python gramps.py -O /home/cristina/.gramps/grampsdb/47320f3d
If no option is given, just a name, Gramps will ignore the rest of the command line arguments. Use the -O flag to open, -i to import, and do something with the data.
Only family trees can be opened directly. For other formats, you will need to use the import option which will set up the empty database and then import data into it.
Only a single family tree can be opened. If you need to combine data from several sources, you will need to use the import option.
The files destined for import can be specified with the
option. The format can be specified with the
option, immediately following the filename . If not specified, the guess will be attempted based on the filename.
python gramps.py -i 'Family Tree 1' -i 'Family Tree 2' python gramps.py -i test.grdb -i data.gramps
More than one file can be imported in one command. If this is the case, Gramps will incorporate the data from the next file into the database available at the moment.
When more than one input file is given, each has to be preceded by
flag. The files are imported in the specified order, i.e.
-i file1 -i file2
-i file2 -i file1
might produce different GRAMPS IDs in the resulting database.
The files destined for export can be specified with the
option. The format can be specified with the
option immediately following the filename . If not specified, the guess will be attempted based on the filename . For iso format, the filename is actually the name of directory the Gramps database will be written into. For gramps-xml, gpkg, gedcom, wft, geneweb, and gramps-pkg, the filename is the name of the resulting file.
-e, export a family tree in required format. It is not possible to export to a family tree.
python gramps.py -i 'Family Tree 1' -i test.grdb -f grdb -e mergedDB.gramps
Note that above does not change 'Family Tree 1' as everything happens via a temporary database, whereas:
python gramps.py -O 'Family Tree 1' -i test.grdb -f grdb -e mergedDB.gramps
will import test.grdb into Family Tree 1, and then export to a file !
Exporting more files
More than one file can be exported in one command. If this is the case, Gramps will attempt to write several files using the data from the database available at the moment.
When more than one output file is given, each has to be preceded by
flag. The files are written one by one, in the specified order.
The action to perform on the imported data can be specified with the
option. This is done after all imports are successfully completed.
The following actions remain the same:
- report: This action allows producing reports from the command line.
- tool: This action allows to run a tool from the command line.
Reports and tools generally have many options of their own, so these actions should be followed by the report/tool option string. The string is given using the
The actions available in older versions of Gramps which were relocated in Gramps 3.3 are:
- summary: This action was the same as Reports ->View ->Summary. In Gramps 3.3 it was replaced by (or renamed to) -a report -p name=summary.
- check: This action was the same as Tools ->Database Processing ->Check and Repair. In Gramps 3.3 it was replaced by (or renamed to) -a tool -p name=check.
report action option
You can generate most reports from the command line using the report action.
gramps -O "Family Tree 1" -a report -p "name=family_group,style=default,off=html,of=test.html"
You can provide the css style to use here with the css option:
gramps -O "Family Tree 1" -a report -p "name=family_group,style=default,off=html,of=test.html,css=Web_Nebraska.css"
or without css in the html output:
gramps -O "Family Tree 1" -a report -p "name=family_group,style=default,off=html,of=test.html,css="
Most of the report options are specific for every report. However, there are some common options.
- name=report_name: This mandatory option determines which report will be generated. If the supplied report_name does not correspond to any available report, an error message will be printed followed by the list of available reports.
- of : output filename
- off: output format. These are the extension an output format makes available, eg, pdf, html, doc, ...
- style: for text reports, the stylesheet to use. Defaults to 'default'.
- show=all: This will produce the list of names for all options available for a given report.
- show=option_name: This will print the description of the functionality supplied by the option_name, as well as what are the acceptable types and values for this option.
So, to learn to use a report, do for example:
gramps -O "Family Tree 1" -a report -p "name=family_group,show=all"
If an option is not supplied, the last used value will be used. If this report has never been generated before, then the value from last generated report will be used when applicable. Otherwise, the default value will be used.
When more than one output action is given, each has to be preceded by
flag. The actions are performed one by one, in the specified order.
On the command line such lists must always start with a left square bracket
and must always end with a right square bracket
but since such square brackets are usually "special" to the "shell" (they mean something to the command interpreter you are typing the command to), you must "escape" them so that they are ignored by your shell.
The details vary with each shell but (in linux/UNIX) usually you can precede such a square bracket with a backslash
or put quotation marks around the square bracket, usually either "single" or "double" ones.
The Hourglass Graph report allows you to put a "note" at the top of the report and such a "note" is an example of a "list" option. Here is an example:
gramps -O "Family Tree 1" -a report -p name=hourglass_graph,note='[line one,line two]'
which shows that inside such a list different lines are separated by commas, and that spaces are acceptable since the quotation marks are already there for the square brackets.
But if you want to have a comma inside your report you have to somehow tell Gramps that comma is not one which separates lines. You do that by enclosing the line with the comma in quotation marks (either single or double).
But if you are already using a set of quotation marks (to enclose your square brackets) you have to use the other type to enclose the line with your comma. Here is an example:
gramps -O "Family Tree 1" -a report -p name=hourglass_graph,note="['line one, also line one','line two, also line two']"
It is possible to include any character in a list but the details are beyond the scope of this command-line introduction to Gramps.
You will need to know the precise methods available in your particular command shell interpreter to include a character which is "special" to your shell or "special" to Gramps (like the comma in the example above) but in general you will have to "escape" it twice, once to your shell and once again to Gramps, since you don't want your shell to think it is some instruction it should pay attention to and you don't want Gramps to think that either.
tool action option
You can run most tools from the command line using the 'tool' action. To see which ones, say:
gramps -O "Family Tree 1" -a tool -p show=all
To see a tool's available options, for instance the "verify" tool:
gramps -O "Family Tree 1" -a tool -p name=verify,show=all
To run a tool, for instance the "verify" tool:
gramps -O "Family Tree 1" -a tool -p name=verify
book action option (new in 4.0)
You can run books from the command line using the 'book' action. To see which ones, say:
gramps -O "Family Tree 1" -a book
To see a book's available options, for instance a book called "mybook":
gramps -O "Family Tree 1" -a book -p name=mybook,show=all
To run a book, for instance a book called "mybook":
gramps -O "Family Tree 1" -a book -p name=mybook
Force unlock option
-u, you can extend the -O flag with -u to force a locked family to be unlocked. This allows you to recover from a crash that leaves the family tree (database) locked, from the command line.
An example (to unlock the "Family Tree 1" database):
gramps -O "Family Tree 1" -a report -u > /dev/null
Note that it is not possible to open family trees that need repair from the command line
Configuration (config) option
The option takes three forms: (the following examples, except 3.2, use behavior.database-path as the configuration variable to change.)
1) See all config values
-s or --show
2) See a value:
--config=behavior.database-path or -c behavior.database-path
3) Set a value:
--config=behavior.database-path:'/media/mydb' or -c behavior.database-path:'/media/mydb'
3.1) Set a value to its default:
--config=behavior.database-path:DEFAULT or -c behavior.database-path:DEFAULT
3.2) Set more than one value:
--config=behavior.use-tips:False --config=behavior.autoload:True or -c behavior.use-tips:False -c behavior.autoload:True
When all configuration variable(s) are set Gramps will start with these new values.
If the first argument on the command line does not start with a dash (i.e. no flag), Gramps will attempt to open the file with the name given by the first argument and start an interactive session, ignoring the rest of the command line arguments.
flag is given, then Gramps will try opening the supplied file name and then work with that data, as instructed by the further command line parameters.
Only one file can be opened in a single invocation of Gramps. If you need to get data from multiple sources, use the importing options by using
With or without the
flag, there could be multiple imports, exports, and actions specified further on the command line by using
flags. The order of
options with respect to each does not matter. The actual execution order always is: all imports (if any) -> all exports (if any) -> all actions (if any).
But opening must always be first!
option is given, Gramps will launch its main window and start the usual interactive session with the empty database, since there is no data to process, anyway. (Unless you have already expressed a "preference" that it start with the last database it used.) If no
options are given, Gramps will launch its main window and start the usual interactive session with the database resulted from opening and all imports (if any). This database resides in the import_db.grdb file under the ~/.gramps/import/ directory.
Any errors encountered during import, export, or action, will be either dumped to stdout (if these are exceptions handled by Gramps) or to stderr (if these are not handled). Use usual shell redirections of stdout and stderr to save messages and errors in files.
- To import four databases (whose formats can be determined from their names) and then check the resulting database for errors, one may type:
gramps -i file1.ged -i file2.gpkg -i ~/db3.gramps -i file4.wft -a check
- To explicitly specify the formats in the above example, append filenames with appropriate -f options:
gramps -i file1.ged -f gedcom -i file2.gpkg -f gramps-pkg -i ~/db3.gramps -f gramps-xml -i file4.wft -f wft -a check
- To record the database resulting from all imports, supply -e flag (use -f if the filename does not allow Gramps to guess the format):
gramps -i file1.ged -i file2.gpkg -e ~/new-package -f gramps-pkg
- To save any error messages of the above example into files outfile and errfile, run:
gramps -i file1.ged -i file2.dpkg -e ~/new-package -f gramps-pkg >outfile 2>errfile
- To import three databases and start interactive Gramps session with the result:
gramps -i file1.ged -i file2.gpkg -i ~/db3.gramps
- To open a database and, based on that data, generate timeline report in PDF format putting the output into the my_timeline.pdf file:
gramps -O 'Family Tree 1' -a report -p name=timeline,off=pdf,of=my_timeline.pdf
- To convert the bsddb database on the fly to a .gramps xml file:
gramps -O 'Family Tree 1' -e output.gramps -f gramps-xml
- To generate a web site into an other locale (in german):
LANGUAGE=de_DE; LANG=de_DE.UTF-8 gramps -O 'Family Tree 1' -a report -p name=navwebpage,target=/../de
- Finally, to start normal interactive session type:
Gramps can take advantage of these environment variables (but do not change them if you do not know what are you doing):
- GRAMPSHOME - if set, override default path to profile allowing user to use ex. network drive to store data and all settings. For technically advanced users who run multiple versions of Gramps, setting a different $GRAMPSHOME is a way to avoid interference between the different versions in the Gramps user directory.
- LANG - is used by Gramps to determine which language file should be loaded.
MacOSX Note: Because of the way launching with Finder works, the environment variables for the Gramps.app bundle are hard-coded in Gramps.app/Contents/MacOS/Gramps. If for some reason you need to change them, edit that file with TextEdit; be sure to save it back as plain text.