Gramps 3.1 Wiki Manual - Main Window/nb
|Special copyright notice: All edits to this page need to be under two different copyright licenses:
These licenses allow the Gramps project to maximally use this wiki manual as free content in future Gramps versions. If you do not agree with this dual license, then do not edit this page. You may only link to other pages within the wiki which fall only under the GFDL license via external links (using the syntax: [http://www.gramps-project.org/...]), not via internal links.
Når du åpner en database (enten en eksisterende eller en ny) vil det følgende vinduet vises:
Hovedvinduet i GRAMPS inneholder følgende element:
- Menubar: Menylinja er plassert helt øverst i vinduet (like under vindustittelen) og gir tilgang til alle mulighetene i GRAMPS.
- Toolbar: Verktøylinja er plassert like under menylinja. Denne gir tilgang til de mest brukte funksjonene i GRAMPS. Du kan styre hvordan den skal se ut ved å gå til RedigereInnstillinger. Du kan også skjule den helt ved å gå til VisVerktøylinje.
- Progress Bar: Fremdriftslinja er plassert nederst i venstre hjørne i GRAMPS-vinduet. Denne viser fremdrift for tidkrevende operasjoner slik som å åpne og lukke store databaser, importere og eksportere til andre filformat, lage nettsider osv. Når du ikke utfører slikt tidkrevende oppgaver vil ikke Fremdriftslinja vises.
- Status Bar: Statuslinjen er plassert til høyre for Fremdriftalinja - helt nederst i GRAMPS-vinduet. Den viser informasjon om den pågående aktiviteten i GRAMPS og tilhørende informasjon om de valgte elementene.
- Display area: Det største området i midten av GRAMPS-vinduet er visningsområdet. Hva som skal vises der avhenger av hvilket visningsmodus en er i. Vi skal diskutere Visningsmodus senere.
Genealogisk informasjon er omfattende og kan være veldig detaljert. Det er en stor utfordring å vise dette, og den utfordringen tar GRAMPS ved å dele opp og organisere informasjonen i en serie med Visninger. Hver Visningen viser en del av den totale informasjonen ut fra valgt kategori. Dette vil komme klarere fram når vi nå skal gå gjennom de ulike Visningene:
- Gramplet View: Viser forskjellige Gramplets, små vrktøy som kan hjelpe deg med historisk research.
- People View: Viser listen med personer i databasen.
- Relationships View: Viser slektskap mellom den valgte personen og andre personer i databasen. Dette inkluderer foreldre, ektefeller og barn.
- Family List View: Viser listen med alle familier i databasen
- Pedigree View: Viser et grafisk stamtavletre for den valgte personen
- Events View: Viser listen med alle hendelser i databasen
- Sources View: Viser listen med alle kildene i databasen
- Places View: Viser listen med alle stedene i databasen
- Media View: Viser listen med alle mediene i databasen
- Repositories View: Viser listen med alle bibliotekene i databasen
- Notes View: Viser alle notater i databasen.
Før vi går inn på en detaljert beskrivelse av hver Visning må vi først beskrive hvordan vi veksler mellom de ulike Visningene.
Switching Views and Viewing Modes
Som nevnt over er det ni ulike Visninger. I tillegg er det to ulike Visningsmodi. Du kan med en gang se hvilken Visningsmodus du er i. Hvis du ser en kolonne med ikoner til venstre i vinduet er du i Sidestolpemodus. Hvis du ser en rad med "notatblokkfliker" (merket Personer, Slektskap, Familieliste, Stamtavle, Hendelser, Kilder, Steder, Media og Bibliotek) som går vannrett over vinduet Du kan veksle mellom disse to Visningsmodi ved å velge VisSidestolpe fra menyvalget Sidestolpe.
Hvis du ikke er i Sidestolpevisning kan du velge Visning ved å klikke på et av ikonene i sidestolpen.
If you're in the Tabbed Viewing Mode, you can select the View you want by clicking the corresponding notebook tab.
Gramplets view viser noen verktøy, kallt Gramplets, som kan hjelpe deg med din research. To Gramplets er vist under oppstart (the Welcome og Top Surname Grampletsen), men ved et høyreklikk på fanen får du mulighet til å legge til flere Gramplets.
For more detailed information see Gramplets. Here we give an overview of the functionalities.
- Age on Date Gramplet: This gramplet computes the ages for everyone in your Family Tree on a given date
- Calendar Gramplet: Shows events on particular days and years
- News Gramplet: Retrieves the News page from the GRAMPS wiki
- Pedigree Gramplet: Shows a compressed Pedigree Chart of past direct ancestors. Also gives a breakdown by generation. Click the links to see matching entries
- Python Gramplet: Shows a window with a Python Shell. This is especially handy as a Date calculator, or for a quick access to Python
- Session Log Gramplet: Shows a log of entries accessed, edited, for deleted for this session.
- Statistics Gramplet: Shows a window with summary statistics of the current Family Tree: number of individuals, males and females, number of families, media objects, etc.
- Surname Cloud Gramplet: Shows a window with a cloud of the most common Surnames.
- TODO Gramplet: In this window you can add yout TODO list, or any notes. Several TODO gramplets can be made to help organize your research
- Top Surnames Gramplet: Shows your top 10 Surnames
- Welcome Gramplet: A Welcome to GRAMPS window
The People View lists the people stored in the database. You'll note that people are grouped according to their family names. To the left of each family name is typically either an arrow or some other type of indicator. Clicking it once will reveal the entire list of people sharing that name. Clicking the indicator again will "roll up" the list and show only the family name.
By default, the People View, displays several columns of information about each person. You can add or remove columns to and from the display by calling up the Column Editor dialog ( Edit ->Column Editor ) and checking or unchecking the boxes listed. You can also change the position of a column in People View by clicking and dragging it to a new position in the Editor. Once you have made the changes you want, click OK to exit the Editor and see your changes in the People View.
The Column Editor is available in all Views and works the same way in each.
Genealogical databases can contain information on many people, families, places, and objects. It's therefore possible for a View to contain a long list of data that's difficult to work with. GRAMPS gives you two different means for controlling this condition by allowing you to filter a list to a more manageable size. These methods are Search and Filtering. A search will search the text displayed in list, whereas filters display people whose data match the criteria of the filter.
Search is a simple but fast method of searching the columns displayed on the screen. Typing the characters into the Search box and clicking the Find button will display only lines that match the text.
Alternatively, you can enable the Filter sidebar, which will be displayed on the right hand side of the display. When the filter sidebar is displayed, the Search bar is not displayed. The Filter side bar allows you to interactively build a set of filter rules that can be applied to the display. The filter is applied based on the rules and the data, not on the screen display.
Searching vs. Filtering
Searching only searches for exact text matches. If the date displayed is "Jan 1, 2000", a search of "1/1/2000" will fail, but a filter of "1/1/2000" will match.
When GRAMPS opens a database, no filtering is in effect. In People View, for example, all people in the database are listed by default.
The Relationships View displays all the relationships of the Active Person (the selected person). Specifically, it shows his or her parents, siblings, spouses, and children.
The Relationships View is designed to allow for quick navigation. You can quickly change the Active Person simply by clicking the name of any person listed on the page. Each name is actually a hypertext link, similar to a web page.
The Relationships View displays the following sections:
- Active Person: At the top of the screen, name, ID, birth, and death information of the Active Person is displayed. If a photo of the person is available, it is shown on the right hand side. Next to the person's name is a symbol indicating gender, and an Edit button. Clicking the Edit button will allow you to edit all of the person's individual information in an Edit Person dialog.
- Parents: The next section, the Parents section, displays the families in which the person is a child. Since it is possible for a person to have multiple sets of parents, it is possible to have several Parents sections.
You can control how much information is displayed by using the View menu. The view menu allows you to show or hide details (the birth and death information) and to show or hide siblings. Next to each person listed is an Edit button, which will allow you to edit all the details of that particular person.
You may add a new set of parents by either selecting the Add Parents or the Share Parents . The Add Parents button will create a new family with the Active Person listed as a child. The Share Parents button will allow you to choose from a list of existing families, and then add the person as a child to that family.
You may edit an existing parents by selecting the Edit button next to the parents. If you select the Delete next to a set of parents, then the Active Person will be removed as a child from the parents. This button does not delete the parents' relationship.
- Family: Similar to the Parents section is the Family section, which displays families where the Active Person is a parent. Because it is possible to have multiple families, it is possible to have multiple Family sections. Each family section displays the spouse and any children.
You may add a family by selecting the Add Spouse in the toolbar. This will create a new family with the Active Person listed as a father or mother.
Selecting the Edit button next to the spouse will allow you to edit the displayed family. Clicking the Delete button will remove the person from the displayed family.
Remove a person
Removing a person from a family does not delete the family. The person is removed as the father or mother, and any other relationships in the family continue to exist.
You can reorder the parents and spouses by selecting the Reorder . This option will only be enabled if more than one set of parents or more than one set of spouses exists for the Active Person. Selecting this button will display a dialog that will allow you to reorder the families.
The Family List View displays a list of all families in the database. From this view, you may add, edit, or delete families. The default display lists the ID, Father, Mother, and Relationship. Children cannot be displayed on the screen in this view.
Unlike the Relationships View, clicking the Remove button in this view will remove the family from the database. All people will remain, but all relationships between the people in the family will be removed.
The Pedigree View displays a family tree of the Active Person's ancestors. The Pedigree View shows up to five generations, depending on the size of the window. Each person is indicated by a box labeled with his or her name, birth and death information, and optionally an image if available. Two lines branch from each box. The top one shows the person's father and the bottom one the mother. Solid lines represent birth relations, while dashed lines represent non-birth relations such as adoption, step-parenthood, guardianship, etc.
To the left of the Active Person is a left arrow button. If the Active Person has children, clicking this button expands a list of the Active Person's children. Selecting one of the children makes that child the Active Person.
The appearance of the children's names in the menu differentiates the dead ends of the tree from the continuing branches.
Children who have children themselves appear in the menu in the boldface and italic type, while children without children (dead ends) appear in a regular font. If the Active Person has only one child, no menu will be displayed (since there is only one choice) and the child will become the Active Person when the arrow button is clicked.
The right-hand side of the window shows two right arrow buttons. When the top button is clicked, the Father of the Active Person becomes the Active Person. When the bottom button is clicked, the Mother of the Active Person becomes the Active Person.
Right-clicking on any person's box in the Pedigree View will bring up the "context menu".
Among other useful items, the context menu has sub-menus listing Spouses , Siblings , Children , and Parents of that person.
"Greyed-out" sub-menus indicate the absence of the data in the appropriate category. Similar to the children menu above, Childrens' and Parents' menus distinguish continuing lines from dead ends.
New in version 2.2 is the inclusion of an Events View.
Events can be shared between multiple people and multiple families. The Events View lists the all the events recorded in the database.
The default view displays the Description , ID , Type , Date , Place and Cause of the event.
Meaningful event description
Because events can be shared, you should take the extra time to give each event a unique and meaningful description. This will help you find the correct event if you decide to share events.
The list of Events can be sorted in the usual manner, by clicking on the column heading. Clicking once sorts in ascending order, clicking again sorts in descending order. The Column Editor dialog can be used to add, remove and rearrange the displayed columns.
Sources View lists the sources of certain information stored in the database.
These can include various documents (birth, death, and marriage certificates, etc.), books, films, journals, private diaries, - nearly anything that can provide genealogical evidence. GRAMPS gives you the option to provide a source for each event you record (births, deaths, marriages, etc.). The Sources View lists the Title , ID , and Author of the source, as well as any Publication information that may be associated with it.
The list of Sources can be sorted by clicking on a column heading.
Clicking once sorts in ascending order, clicking again sorts in descending order. The Column Editor dialog can be used to add, remove and rearrange the displayed columns.
The Places View lists the geographical places in which the events of the database took place. These could be places of birth, death, and marriages of people, as well as their home, employment, education addresses, or any other conceivable reference to the geographical location. The Places View lists the places' Name , ID , Church Parish , City , County , State , and Country . All of these columns can be used for sorting by clicking on a column heading.
Clicking once sorts in ascending order, clicking again sorts in descending order. The Column Editor dialog may be used to add, remove and rearrange the displayed columns.
If a place has been highlighted, you may select the Google Maps button to attempt to display the place in a web browser.
Your default web browser should open, attempting to use either the longitude and latitude coordinates or the place name to display the location using the Google Maps web site.
This feature is limited, and may not always produce the results you desire.
The Media View is a list of Media Objects used in the database.
Media Objects are any files that relate somehow to the stored genealogical data.
Technically, any file can be stored as a Media Object.
Most frequently, these are images, audio files, animation files, etc. The list box on the bottom lists the Name , ID , Type , and Path of the Media Object.
The Column Editor dialog may be used to rearrange the displayed columns, which obey usual sorting rules. The top part of the GRAMPS window shows a preview (if available) and information about the Media Object.
Version 2.2 adds support for Repositories.
A repository can be thought of as a collection of sources.
Each source in the database can reference a repository (such as a library) in which it belongs. The functionality of the Repositories View is similar to the other views.
Version 3.1 added support for Notes. A Note is pure text, as stored in the other objects.
The functionality of the notes View is similar to the other views. The view lists all Notes stored in the Family Tree. With the Edit ->Column Editor you can change the displayed columns. The possibilities are Preview, ID, Type and Marker.
The Type can be (amongst others): Event Note, Adress Note,Source text, Place Note
Double-clicking on a Note in the list will bring up a window where you can edit the Note. You can change fonts, font color and backgroundcolor. A spellchecker is available for English and your local language.