Nl:Gramps 3.1 Wiki Handleiding - Invoeren en aanpassen gegevens: details - deel 3

From Gramps
Jump to: navigation, search
Gnome-important.png Special copyright notice: All edits to this page need to be under two different copyright licenses:

These licenses allow the Gramps project to maximally use this wiki manual as free content in future Gramps versions. If you do not agree with this dual license, then do not edit this page. You may only link to other pages within the wiki which fall only under the GFDL license via external links (using the syntax: [https://www.gramps-project.org/...]), not via internal links.
Also, only use the known Typographical conventions


Vorige Index Volgende



Namen

Names are edited through the following Name Editor dialog:

Names Editor

The top of the window shows the dialog title including the name of the person whose name is being edited. The central part of the window displays three notebook tabs containing different categories of available information. You can bring any tab to the top for viewing or editing by clicking on the appropriate tab heading. The bottom part has OK and Cancel buttons. Clicking the OK button at any time will apply all the changes made in all tabs and close the dialog window. Clicking the Cancel button at any time will close the window without applying any changes.

Tip:

The tab labels reflect the presence of corresponding information: if the tab contains any data, its label appears boldface; if the tab has no data then its label appears regular (not bold).

The tabs provide the following information categories of the name data:

  • General

The General tab allows editing of general information about the name: given name, family name, patronymic (a form of father's name used in some languages, e.g. Russian), family prefix, suffix, title, and type of the name. The information can be typed in the appropriate text entry fields. The family name and the type can be also selected from available choices listed in the appropriate drop-down menus.

Options allow you to adjust specific grouping, sorting, and displaying properties of this name, as well as to provide the date corresponding to the name. The Grouping field provides an alternative grouping node for a given name, overriding the default grouping based on the family name. This may be necessary with similar family names that need to be grouped together -- for example Russian names Ivanov and Ivanova are considered the same, but difference in gender is reflected in different spelling. To enable typing into this field, check the Override check button. The Sort as and Display as determine the manner in which the name appears in the People View and in the reports. The Date can provide information on the validity of this name -- use spans as necessary. Check the Private record box to mark this name record as private. This will give you a chance to omit this name from being included in reports, if you choose so among the report generation options.

  • Sources

The Sources tab displays information about sources relevant to this name and controls allowing its modification. The central part displays the list of all such sources' references stored in the database. The buttons + , Edit , and - allow you to correspondingly add, modify, and remove a source reference to this name. Note that the Edit and - buttons become available only when a source reference is selected from the list.

  • Note

The Note tab displays any notes concerning the name. To add a note or modify existing notes simply edit the text in the text entry field.

The Format option allows you to set the appearance of the note in the output (i.e. in reports and web pages). Selecting Flowed will replace all multiple spaces, tabs, and single end-of-line characters with single space in the output. The two consecutive new lines (i.e. an empty line) denote a new paragraph. Selecting Preformatted will honor all multiple spaces tabs, and new lines, so that the output will appear as it is entered into the text entry field.

Kenmerken

Attributes are edited through the following Attribute Editor dialog:

Attribute editor

The top of the window shows the dialog title including the name of the person whose attribute is being edited. The central part of the window displays three notebook tabs containing different categories of available information. You can bring any tab to the top for viewing or editing by clicking on the appropriate tab heading. The bottom part has OK and Cancel buttons. Clicking the OK button at any time will apply all the changes made in all tabs and close the dialog window. Clicking the Cancel button at any time will close the window without applying any changes.

Tip:

The tab labels reflect the presence of corresponding information: if the tab contains any data, its label appears boldface; if the tab has no data then its label appears regular (not bold).

The tabs provide the following information categories of the attribute data:

  • General

The General tab allows editing of the most general information about the attribute: name of the attribute and its value. The information can be typed in the appropriate text entry fields. The attribute name can also be selected from available choices (if any) listed in the Attribute drop-down menu. Check the Private record box to mark this attribute record as private. This will give you a chance to omit this attribute from being included in the reports, if you choose so among the report generation options.

  • Sources

The Sources tab displays information about sources relevant to this attribute and controls allowing its modification. The central part displays the list of all such sources references stored in the database. The buttons + , Edit , and - allow you to correspondingly add, modify, and remove a source reference to this attribute. Note that the Edit and - buttons become available only when a source reference is selected from the list.

  • Note

The Note tab displays any notes concerning the attribute. To add a note or modify existing notes simply edit the text in the text entry field.

The Format option allows you to set the appearance of the note in the output (i.e. in reports and web pages). Selecting Flowed will replace all multiple spaces, tabs, and single end-of-line characters with single space in the output. The two consecutive new lines (i.e. an empty line) denote a new paragraph. Selecting Preformatted will honor all multiple spaces tabs, and new lines, so that the output will appear as it is entered into the text entry field.

Adressen

Addresses are edited through the following Address Editor dialog:

Address editor

The top of the window shows the dialog title including the name of the person whose address is being edited. The central part of the window displays three notebook tabs containing different categories of available information. You can bring any tab to the top for viewing or editing by clicking on the appropriate tab heading. The bottom part has OK and Cancel buttons. Clicking the OK button at any time will apply all the changes made in all tabs and close the dialog window. Clicking the Cancel button at any time will close the window without applying any changes.

Tip:

The tab labels reflect the presence of corresponding information: if the tab contains any data, its label appears boldface; if the tab has no data then its label appears regular (not bold).

The tabs provide the following information categories of the address data:

  • General

The General tab allows editing of the most general information about the address: date, street address, city or county, state or province, country, the postal code, and the phone number. The information can be typed in the appropriate text entry fields. Check the Private record box to mark this address record as private. This will give you a chance to omit this address from being included in reports, if you choose so among the report generation options.

  • Sources

The Sources tab displays information about sources relevant to this address and controls allowing its modification. The central part displays the list of all such sources references stored in the database. The buttons + , Edit , and - allow you to correspondingly add, modify, and remove a source reference to this address. Note that the Edit and - buttons become available only when a source reference is selected from the list.

  • Note

The Note tab displays any notes concerning the address. To add a note or modify existing notes simply edit the text in the text entry field.

The Format option allows you to set the appearance of the note in the output (i.e. in reports and web pages). Selecting Flowed will replace all multiple spaces, tabs, and single end-of-line characters with single space in the output. The two consecutive new lines (i.e. an empty line) denote a new paragraph. Selecting Preformatted will honor all multiple spaces tabs, and new lines, so that the output will appear as it is entered into the text entry field.

Gegevens samenvoegen

Fig.x.yy. Personen vergelijken

Het kan gebeuren dat verschillende gegevens in het gegevensbestand hetzelfde onderwerp blijken te beschrijven: dezelfde persoon, dezelfde plaats of dezelfde bron.

Misschien zijn de gegevens per vergissing tweemaal ingegeven of het kan zijn dat nieuwe informatie aantoont dat twee gegevens verwijzen naar eenzelfde persoon.

Ook kan het zijn dat door het importeren van een GEDCOM-bestand van een familielid waarvan de gegevens gedeeltelijk uw eigen gegevens overlappen.

Telkens u duplicaten ontdekt, is samenvoegen van de gegevens een goede manier om de situatie te corrigeren.

Tango-Dialog-information.png
Tip

Om een samenvoeging te kunnen doen moeten exact twee gegevens geselecteerd worden in het desbetreffende scherm (personen-, bronnen-- of locatiescherm). Dit doet u door eerst een gegeven te selecteren om vervolgens een tweede gegeven te selecteren terwijl u de Ctrl toets ingedrukt houdt.


Personen samenvoegen

Fig.x.yy. Personen samenvoegen

Er zijn twee manieren om persoonsgegevens samen te voegen: Vergelijken en samenvoegen en Snel samenvoegen. De twee manieren zijn te bereiken via het Bewerken menu.

Gramps-notes.png
Note

Het samenvoegen van personen zal geen informatie weggooien ongeacht de gebruikte methode. De beslissingen die u neemt tijdens het samenvoegen zullen enkel een effect hebben op welke informatie als primair en secundair zal beschouwd worden voor het samengevoegde gegeven.


  • Vergelijken en samenvoegen

Wanneer twee personen zijn geselecteerd, kiest u Bewerken ->Vergelijken en samenvoegen om het venster Personen vergelijken te tonen.

Het venster laat u toe om een beslissing te nemen of de personen al dan niet moeten samengevoegd worden. Indien u beslist dat de gegevens niet samengevoegd dienen te worden, klikt u op Annuleren om het venster te sluiten zonder aanpassingen. Wilt u toch doorgaan met het samenvoegen, kiest u met behulp van cirkels Selecteren welk gegeven moet gebruikt worden als primaire gegevensbron. Klik vervolgens op Samenvoegen en sluiten.


De andere gegevens zullen als alternatieve gegevensbron bewaard worden.

Meer bepaald zullen alle namen van het alternatieve gegeven beschouwd worden als alternatieve namen voor het samengevoegde gegeven. Zo ook zullen ouders, kinderen en echtgenoten dus alternatieve ouders, kinderen en echtgenoten worden van het samengevoegde gegeven.

  • Snel samenvoegen

Wanner twee personen zijn geselecteerd kiest u Bewerken ->Snel samenvoegen.


Het getoonde venster Personen samenvoegen laat u toe om snel twee personen samen te voegen en aan te geven welke persoon als primaire gegevensbron moet gebruikt worden. Ook hier wordt het andere gegeven als alternatieve geven bewaard.

Meer bepaald zullen alle namen van het alternatieve gegeven beschouwd worden als alternatieve namen voor het samengevoegde gegeven. Zo ook zullen ouders, kinderen en echtgenoten dus alternatieve ouders, kinderen en echtgenoten worden van het samengevoegde gegeven.


Tango-Dialog-information.png
Tip

Indien u er echter niet zeker van bent welk gegeven als primair moet beschouwd worden of dat de gegevens wel kunnen samengevoegd worden, gebruikt u best de eerste Vergelijken en samenvoegen methode zoals hierboven beschreven.


Bronnen samenvoegen

Fig.x.xx. Bronnen samenvoegen

Wanneer twee bronnen zijn geselecteerd kiest u Bewerken ->Samenvoegen .

Fig.x.xx. Locaties samenvoegen

Het venster laat u toe om een beslissing te nemen of de bronnen al dan niet moeten samengevoegd worden. Indien u beslist dat de gegevens niet samengevoegd dienen te worden, klikt u op Annuleren om het venster te sluiten zonder aanpassingen. Wilt u toch doorgaan met het samenvoegen, kiest u met behulp van de dubbele rijen cirkels die naast de brongegevens staan welke tiele, auteur, afkorting, publicatie en GRAMPS ID de samengevoegde bron moet hebben. Vervolgens klikt u op OK.

Locaties samenvoegen

Wanneer twee locaties zijn geselecteerd kiest u Bewerken ->Samenvoegen. Dan wordt het Titel-selectie venster getoond.


Het venster laat u toe om een beslissing te nemen of de locaties al dan niet moeten samengevoegd worden. Indien u beslist dat de gegevens niet samengevoegd dienen te worden, klikt u op Annuleren om het venster te sluiten zonder aanpassingen. Wilt u toch doorgaan met het samenvoegen, kiest u met behulp van de cirkels die aan de linkerzijde van het venster, naast de locatienamen staan om de titel van de samengevoegde locatie te bepalen. Of u kiest Overige en voert een nieuwe tekst in. Vervolgens klikt u op OK.

Vorige Index Volgende